EndiT DU Casing End Seal
Available, delivery time: 1-3 working days
Product number:
1-012-05411
| Ending of pipe-in-pipe systems for new installations; suitable also for larger dimensions; requirement for a dirt- and moisture-protected sealing solution |
| Description | fastening straps stainless steel |
| Material type | EPDM Rubber |
| Shore hardness | Shore A 50 ° ±5 |
| Rubber thickness | 5 bis 6 mm |
| Color | black |
| Description | Solution for fixed standard combinations of carrier and casing pipes ability to compensate eccentric installed carrier pipes easy installation due to pre-molded end seal
|
| Casing end seals are available for new installations, and for retrofitting. |
| Size | 64 x 92 mm |
|---|
Features
Protection against moisture and dirt Also suitable for retrofitting Individual or special solutions possibleAreas of application
Pipes carrying media (e.g. gas pipeline, water pipeline, sewage pipeline, etc.) below motorways, main roads, railway tracks, etc. are often laid in casing pipes, here they are used as protective pipe closures.Description
The end seals are used to seal the annular space between the carrier pipe and the casing pipe against dirt and moisture.Assembly Instructions
| 1 | Pull small end of the seal over the carrier pipe. |
| 2 | After connections the pipe, pull the large end of the seal over the casing pipe as far as possible. The fitting position of DU seals is determined by their design. |
| 3 | Place stainless steel straps around the small and large diameters. Pull the free end of the strap at least 50 mm through the square opening in the clamp and then fold it. The folded end must be placed under the fastening strap. Tighten the clamp as far as possible using a socket spanner. See also the installation instruction for steel strap |
|
PSI Products GmbH
Ulrichstrasse 25
72116 Mössingen
Telefon: 0 049 (0)7473 37 81 0
E-Mail: vertrieb@psi-products.de